Measurements have shown that a ZipFix fabric cover with a three metre drop can be assembled almost twice as quickly as the traditional fastening method using a rod. Because there is no longer a pocket on top, this also saves one rod per cover as well as 3 cm of fabric. A second major plus is that you no longer need to pull the ZipFix fabric cover for assembly.
The same advantages also apply to ClickOn, with the difference being that the ZipFix fastening can be carried out a good deal more quickly.

A fabric mounted by means of the ZipFix fastening profile can be very easily adjusted by hand on the roller tube. In doing so, the fabric can be fitted perfectly perpendicular to the bottom bar. With both ZipFix and ClickOn the fabric can be easily removed and replaced if necessary.

When a rolled up fabric fastened by means of a rod is unrolled after some time, it will display unsightly horizontal impression lines at regular distances. If the fabric is fitted with the ClickOn system, these impression lines are reduced to a minimum. With the ZipFix system, they disappear altogether.

The ClickOn fastener can be mounted much more quickly than traditional systems thanks to a plug & play system. The result is a significant gain of time. An additional advantage is that the thickening which occurs where the fabric is attached to the roller tube, is kept to a minimum. Consequently, the horizontal impression lines that appear with other systems when the fabric is rolled up, are strongly reduced.

ClickOn is a special, ultrafine plastic profile that is welded to the top of the fabric and that can be attached to the roller tube in one simple movement. The profile also has a high tensile strength and is wear-resistant.